GUHRING - GM300 - Инструментальная оснастка

                                                           для размещения заказа - guhring@guhring-tools.ru

The 4-point clamping technology for conventional cooling

General notes: Our manual clamping sets must not be operated with motor-driven tools (impulse screwdriver or similar). The hexagonal
key should not exceed the key size over its entire length, this largely prevents excessive torque being transferred. We recommend the
T-handle hexagonal key, Guhring no. 4912. For accurate setting of the maximum torque and achieving the maximum interface rigidity,
we recommend the application of a torque wrench, Guhring no. 4915 with hexagonal sockets, Guhring no. 4916. Removal of the
locking ring is made by releasing the pressure ball screw. This is achieved with the use of an Allen key inserted through the opposite
access hole and through the hollow threaded spindle and turned counter-clockwise. Once released, the locking ring will slide axially off.
Production drawings of the spindle contour to suit direct installation are available on request, including .dxf.

Application examples                  Spindle adaptor (integrated)  Spindle adaptor (in front)

Spindle interface

Direct installation in
spindle

Adaptor                               HSK-C extension               HSK-A reduction
Basic adaptor for ISO taper spindles

170 GM 300                            guhring@guhring-tools.ru
                                        www.guhring-tools.ru
GUHRING - GM300 - Инструментальная оснастка - 2015 EN
