GUHRING - RT 100 VA - Сверла для обработки нержавеющих сталей и спецсплавов - 2010 EN
для размещения заказа - guhring@guhring-tools.ru
RT 100 VA
For the production of accurate holes in stainless steels with highest cutting rates and long tool life, Guhring has develo-
ped the new RT 100 VA.The RT 100 VA achieves its extraordinary efficiency thanks to
• carbide developed for the machining of stainless steels
• theTiAlN nanoA wear resistant coating
• tool geometry perfected for the machining of stainless steels
In addition, the high feed rates achievable with the RT 100 VA are thanks to the optimal heat dissipation via the chips.
Additionally the highly effective coolant supply via the internal coolant ducts, having maximum cross section, supports
the heat dissipation as well as chip evacuation and also counteracts the risk of localised hardening.
The program
The RT 100 VA is available in four designs as part of the standard program:
Standard Type Shank Cooling Cutting Drilling Tole- Tool description Tool Surface Diameter Guhring
form direction depth rance material finish no.
RT 100 Solid nTaiAnoINA 3,00 - 20,00 8510
carbide
VA
Solid nTaiAnoINA 3,00 - 20,00 8610
RT 100 carbide
VA Solid nTaiAnoINA 3,00 - 20,00 8511
carbide
RT 100
Solid nTaiAnoINA 3,00 - 20,00 8611
VA carbide
RT 100
VA
Special solutions
Furthermore, we supply intermediate sizes or step drills as special tools for your specific application tasks on request.
Designs are also possible for drilling depths in excess of 5xD. Complete the form on page 16 or contact us!
Notes regarding application
A cutting speed should be chosen out of the Navigator and can greatly depend on the material composition. Machining
tests are paramount for selecting the optimal cutting speed.
Due to the high cutting load particular attention must be paid to maximum rigidity of the machine as well as the
workpiece and tool clamping. Always select the shortest possible tool for your machining task.
Application recommendations for Guhring RT 100 high-performance Ratio drills
Recommendations regarding tool suitability for the following application groups can be found on the following price
and program pages:
optimal suitability
limited suitability
not suitable
Application group Material examples
P Steel, high-alloyed steel
M Stainless steel
K Grey cast iron, spheroidal and malleable cast iron
N Aluminium and other non-ferrous metals
S Special-, super- andTi-alloys
H Hardened steel and hard cast iron
Pictograms see page 14
guhring@guhring-tools.ru 3
www.guhring-tools.ru
