для размещения заказа - guhring@guhring-tools.ru
Application examples
Milling cutters
Milling of sealing surface
Workpiece Gearbox case
Material Al Si 9
Tool Face milling cutter (Monobloc milling cutter)
Standard H 6120-8000 8063 R 80
Number of teeth z = 11, all adjustable
Insert W 6120-0418 0000 N
Cutting grade PCD
Cutting speed Vc = 2.011 m/min
Number of revolutions n = 8.000 1/min (max. nr. of spindle revolutions)
Feed rate Vf = 14.344 mm/min
Feed rate per tooth fz = 0.163 mm
Internal coolant yes, 70 bar above the coolant distribution screw
Surface requirement Rz = 12 - 25
Milling on pump housing
Workpiece Pump housing
Material Al Si 1
Tool Face milling cutter (Put-on milling cutter)
Standard H 6120-6300 8063 R 63
Number of teeth z = 8, all adjustable
Insert W 6127-0318 0045 R
Cutting grade PCD
Cutting speed Vc = 3.560 m/min
Number of revolutions n = 18.000 1/min
Feed rate Vf = 20.000 mm/min
Feed rate per tooth fz = 0.14 mm
Internal coolant yes, 50 bar above the coolant distribution screw
47
guhring@guhring-tools.ru
www.guhring-tools.ru
